ILD-110
Single Channel Vehicle Loop Detector
Adjustable multistage sensitivity ,meet all kinds of needs
Industrial design, super anti-interference ability and stability
Support automatic detection function if coil is fault
Can cooperate with barrier to achieve automatic close function when car leave
ILD-110 is used for wherever vehicles have to be detected, for example for monitoring and safe-guarding
access ways or for counting vehicles. The output signal can be used for controlling door and gate drive
mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.
ILD-110 has two-way output relays. One is unlimited output when loop is temporarily covered, while the
other is multi-mode that can be set by users.
| Technical data | ILD-110 |
|---|---|
| Supply Voltage | 230V AC, 115V AC, 24V DC/AC, 12V DC/AC, Optional (For details as per the label on the detector) |
| Tolerance for AC | +10% / -15% |
| Tolerance for DC | ±15% |
| Power Consumption | 4.5W |
| Output Relays | 240V/5A AC |
| Operating Temperature | -20 °C to +65 °C |
| Storage Temperature | -40 °C to +85 °C |
| Frequency Range | 20 kHz to 170 kHz |
| Reaction Time | 100ms |
| Presence Time | Permanent |
| Sensitivity | Adjustable in 3 levels |
| Loop Inductance | 50μH to 1000μH (Optimum: 100μH to 300μH) |
| Feeder | Max length 20 meters, twisted at least 20 times per meter |
| Size of Housing | 78*40*108 mm (L * W * H) |