IVD-410
Double Channel Vehicle Loop Detector
Industrial design, super anti-interference ability and stability
Support automatic detection function if coil is fault
Can cooperate with barrier to achieve automatic close function when car leave
IVD-410 is used for wherever vehicles have to be detected, for example for monitoring and safe-guardingaccess
ways or for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms,
operating barriers, controlling traffic light systems or activating card dispensers in parking lots.
IVD-410 has four-way output relays. Two outputs of them are unlimited when the corresponding loop is permanently covered,
while the others are multi-mode that can be set by users. The direction detecting Function can be used to statistics the vehicle flux.
| Technical data | IVD-410 |
|---|---|
| Operating voltages | 12V AC/DC ±5% 24V AC/DC ±5% 110V AC ±10% 220V AC ±10% |
| Power consumption | < 5W |
| Output | Relay output |
| Frequency Range | 20KHz to 170KHz (adjustable) |
| Reaction time | 100 ms |
| Sensitivity | High, medium, low (adjustable) |
| Loop inductance | Ideal 80µH to 300µH (include connecting wiring) Max 50µH to 500µH (include connecting wiring) |
| Loop conn. Wiring | Max. 100m, twisted at least 20 times per meter, Total resistance<10 Ohm |
| Operating temp | -30℃ to +70℃ |
| Storage temp | -40℃ to +85℃ |
| Connection | 11-pin socket |
| Dimensions | 74×36×85 mm (L×W×H) |
| Net Weight | 270g (include socket) |