s k y p e


Single Channel Vehicle Loop Detector

Acess Pro Schranke

      Adjustable multistage sensitivity ,meet all kinds of needs

      Industrial design, super anti-interference ability and stability

      Support automatic detection function if coil is fault

      Can cooperate with barrier to achieve automatic close  function when car leave

PD132 is used for wherever vehicles have to be detected,for example for monitoring and safe-guarding 

accessways or for counting vehicles. The output signal can be used for controlling door and gate drive 

mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.

PD132 has two-way output relays. One is unlimited output when loop is temporarily covered,

while the other is multimode that can be set by users.

phone icon


datenblatt icon


Product pictures
Dimensional drawings
Design und Qualität Bild

Design und Qualität Bild

Design und Qualität Bild

Technical dataPD-132
Operating voltage 220V AC±10%
Power Consumption<5W
OutputRelay Output
Frequency range20 KHz to 170 KHz (4 grades adjustable)
Reaction time10ms
Signal holding timeUnlimited / limited 10 minutes when loop is permanently covered
Sensitivity8 grades (adjustable)
Loop inductanceIdeal 100μH to 300μH (include connecting wiring)
Loop Conn. WiringMax. 100m, twisted at least 20 times per meter, total resistance<10 Ohm
Autocorrecting time1s to 2s
Operating temp-30°C to +70°C
Storage temp-40°C to +85°C
Relative humidity≤ 95%
Net Weight300g(include socket)
Connection11-pin socket
Dimensions74×36×85 mm (L×W×H)